Swing Gates Range

• Ditec PWR 25
  For gate wings up to 2.5 m

  -simply loosen a single screw to remove the plastic cover and access the electrical wire terminals
  -key-operated manual release
  -actuator consisting of two robust aluminium die castings which guarantee optimum protection against shearing forces and torsion

   

  • Download Brochure

Ditec PWR 35
For gate wings up to 3.5 m

-simply loosen a single screw to remove the plastic cover and access the electrical wire terminals
-key-operated manual release
-actuator consisting of two robust aluminium die castings which guarantee optimum protection against shearing forces and torsion

-removable cover to access the screw without removing the actuator from the wing
-loading valve to inject EP1 universal grease
-notches to adjust magnetic limit switches (optional) during opening and closing and supports for cable stop clamps

• Download Brochure

Ditec PWR50H:
IRREVERSIBLE with limit stops UP TO 450,000 CYCLES
For gate wings up to 5m

-manual release designed to guarantee to open with minimal effort

-removable cover for easy access to the screw for adjustment and maintenance
-mechanical limit stops already assembled both in opening and closing
-dustproof brushes to protect the screw

• • Download Brochure

SIMPLIFIED installation

Reduces the time needed to install new motors on the PWR series by 60%! (using the Ditec patented install tool, available separately)

· automation system includes asymmetric mechanical opening and closing stops

· one-handed installation: the hexagonal impression makes it easier to attach the actuator to the hinge post

· pre-drilled plates for fast installation, with robust bushings for optimum distribution of forces along the front connection pin

· installation mounting tool includes a spirit level to perfectly calibrate heights in a single step

SIMPLE ADJUSTMENT, FAST INSTALLATION

· precise adjustment of mechanical limit stops directly on the screw (PWR50H)

SAFE
The 24-Volt DC virtual-encoder technology enables constant electronic control of the impact forces and immediate obstacle detection, ensuring that the operating device stops or motion is reversed (if configured) when obstacles are detected. If this is not enough, you can add magnetic limit switches (on PWR 35, already assembled on PWR 50). Additionally, in the event of a power outage, the electronic control panel intervenes, activating the batteries (battery back up sold separately)which ensure correct operation of the system.

EASY TO MAINTAIN
Thanks to the protected loading valve inside the manual release area, universal lubricant (type EP1) can be added simply using a grease gun, with no need to disassemble the actuator.

Articulated Arm Automations for Swing Gates

The most appropriate words to describe Facil automations are ease of use and flexibility. Irreversible electromechanical automations for swing gates, they are the ideal solutions for heavy duty applications. Quiet and sturdy, they are easy to install and can be connected to any applications, however complex, such as wings supported by very large or out-of-plumb pillars.

Facil have been designed to ensure ease of installation and connection, as well as suitability to use with different types of motor and its practicality.

For both actuators, the ABS guard ensures a good weather resistance and boasts high quality and elegant finishes, simple and clean lines, and perfectly blends to any type of entrance.

Facil has also been design to accommodate a cord-operated release system and a reduction unit disconnected indication microswitch The automation comes complete with adjustable mechanical stops.

Features:

FACIL:

• For gate wings up to 2.3m
• Manual release easily accessible in case of power failure
• Open /close mechanical stops as standard
• 24v version available with option of battery back-up

• Download Brochure

ARC External Automatic System

If the gate’s support pillars are of large dimensions or if the wings are “out of plumb”, the suitable automations are ARC models: geared motors with articulated arm motion transmission, capable of effectively solving even the most complex technical problems.

Available in 24v DC.

This system has been specially designed to move any type of gate without having to modify its structure.

The system is very practical and gates can be motorized even in peculiar conditions or difficult installations due to very large pillars or out of plumb wings.

Its installation is very simple and can be done by fitting the geared motor to the pillar, laterally to the wing to be activated and by connecting the articulated arm between the geared motor’s lower shaft and the adjustable profile fastened to the door.

The design is very essential and simple. Its contemporary colours allow it to blend in with both modern and traditional looking gates.

Features:

• Very easy installation
• Single solution for right-hand and left-hand leaves
• Start-up at maximum power (MPS)*
• Adjustable obstacle detection (ODS)*
• Stroke with adjustable brake (DC)*

*with LOGIC control panels

• Cubic 6H

  If you prefer “hidden” versions, the ideal models are CUBIC geared motors that, housed under the gate, reliably open the gate to which they are secured.

  CUBIC is an underground, electromechanical system specially designed to “invisibly” move any type of swing gate or main door with no need to install external actuators onto the gate or post.

  The system is composed of a strong geared motor, housed in a foundation casing beside the gate pier; this geared motor, through a special kynematic group or gear system, causes the rotation of the gate leaf.

  Should a failure occur, the gate can be manually opened or closed by releasing the geared motor mechanism by using an extended key control or powering the geared motor (DC) with batteries.*

  The “concealed” solution allows the movement of valuable gates, both modern and traditional, without modifying their aesthetics.

  Features:

  • “Totally Concealing” system
  • Possible gate leaf opening up to 180°
  • Gate leaf adjustable speed (DC)*
  • Starting at max power (MPS)*
  • Adjustable obstacle detection (ODS)*
  • Stainless Steel embedding box optional

  *with LOGIC control panels

  • Download Brochure